Snow Blowers

Fit For the Following Models. This is a set of 2 track drive wheels for track series snow blowers. This is the rear drive wheel assembly on the track snow blowers and the hub size is 3/4. This all metal part is laser cut and welded. These Do NOT fit if you have a splined Axle Shaft. Specs 7 1/2 outside diameter 10 drive cogs 3/4 inch hub. Please leave us your full name, your telephone number and detailed address when ordering. We try our best to pack the products as good and safe as possible, so they always arrive in a good condition. We offer sophisticated products at a high technological level, with the highest possible quality and the most favorable price. With these parts you can replace your defective parts simply plug and play. 24 months without mileage limitation. Please compare carefully with Photos or OE number before purchasing the part. We try our best to pack the products as good and safe as possible, so they always arrive in a good condition. With these parts you can replace your defective parts simply plug and play. Please compare carefully with Photos or OE number before purchasing the part.

admin rear 631-0002, assembly, cogs, drive, inch, rear, snowblower, wheels

This is a good used set of steel rims and Carlisle tires from a John Deere 1032 snowblower.

admin john carlisle, deere, john, snowblower, tires, wheels

Very nice wheels (tires and rims) off of a Toro 824 Powershift snowblower. Comes with axle pins.

admin toro 480-8, carlisle, powershift, toro, wheels

This is a set of wheels/tires with hub jaw clutch inserts from a vintage Toro 826 snowblower. These often need to be replaced as the jaw teeth wear over the years, disabling an otherwise good machine. The 16 tires have some pretty good cracks but do hold air fine. They may have inner tubes. If you only need one assembly make an offer.

admin rare clutch, inserts, rare, snowblower, tires, toro, wheels

This is a pair of good used wheels and tires from a Toro snowblower. They are from a larger machine and are a little over 16″ in diameter with 7/8″ center bores. Any questions just ask.

admin genuine axle, genuine, snowblower, tires, toro, wheels

13×5.00-6 13×500-6 13/5.00-6 TIRE RIM WHEELs Garden Tiller Snow Blower Thrower. Your assemblies will arrive aired up and ready to mount on your axle. Please read the add fully and see pictures top of page before you ask questions as we have detailed information in the description about this product. These are DIRECTIONAL (1)RIGHT / (1)LEFT Assemblies (SEE PICTURES). Part Numbers: 86151-L ; 86151-R. This Kenda tire rim assembly is designed for medium to heavy-duty usage and fits some but not all models of various brands including McCullagh, Worx, DR Trimmer, Ditch Witch, Brunton, and more. The 13×5.00-6 size and 2-ply construction make it suitable for self-propelled tillers, trimmers, brush mowers, and even go karts, snow blowers, and throwers. Items included in this (2)first quality new tire & rim assemblies mounted with 1/4 inch dowel hole and 3/4 inch ID axle rims, aired up and ready to mount. The equipment types it can be used with include ground drive, mowers, edger’s, carts, wagons, pulling, traction, ground driven equipment, snow throwers, snow removal, snow plows, rear tine tillers, garden tillers, garden equipment, chippers, shredders, and more. BRAND: Kenda SIZE: 13×5.00-6 TREAD: A-478 Traction. DESCRIPTION: 2ply (load range “A”) Tube-Less R-1 Tiller / Snow blower Tire NHS. Height: 12.8 inches Width: 5.0 inches Rim Diameter: 6 inch. Weight Capacity: 295 lbs. NOTE: NHS This tire a N on H ighway S ervice Tire. BRAND: Monitor (MADE IN THE U S A) Rim Size: 6 x 4.375. Rim Diameter: 6 ” Rim Width: 4.375 “. One piece Welded Steel / Drive Axle /. Center Hole Opening: 3/4 (uses 3/4 inch shaft or axle) {see picture above}. Shaft Length: 5.25 over all SHAFT length measured through the center of the rim; shaft end to shaft end. Dowel hole size: 0.25 Shaft Offset: {see picture above}. AMOUNT OF SHAFT sticking out {each side of rim}. Outside of Rim: valve stem side – 1.25 inch {see picture above}. Inside of Rim: towards the frame of mower 3.50 inches {see picture above}. The remaining portion of the shaft is between the two halves of the rim, giving this type rim superior strength and stability. Original Equipment applications include: Husqvarna, John Deere, Troy, Snapper, Arens, Murray. Toro, Bobcat, Brunton, MTD, Ditch Witch and many other brand Mowers, Tillers and Trenchers and Snow blowers. Carter Brothers, Roketa, Helix and other brand GO KARTS and many other LIVE AXLE TYPES EQUIPMENT used in various industrial applications. CUSTOM BUILDERS AND ALL DEALERS WELCOME.

admin 13x500-6 13500-6, 13x500-6, blower, garden, snow, thrower, tiller, tire, wheels

This is a set of 2 track drive wheels for track series snow blowers. This is the rear drive wheel assembly on the track snow blowers and the hub size is 3/4. This all metal part is laser cut and welded. These Do NOT fit if you have a splined Axle Shaft. Specs 7 1/2 outside diameter 10 drive cogs 3/4 inch hub.

admin track 631-0002, drive, part, rubber, snowblower, track, wheels

This is a BRAND NEW in the box Dakota SnoBlade Snow Removal Push Shovel on Wheels. Discover the secret to snow removal in North Dakota. Made and assembled in the USA. You will not find a finer snow removal shovel on the market. If you have serious snow to move, look no further than the ORIGINAL Dakota SnoBlade w/ 36 Shovel Blade. This bi-directional snow blade makes it easy and simple to clear your drive and sidewalk in half the time with half the effort needed for conventional shoveling. The Dakota Sno-Blade’s simple design is ideal for use at home or at your business. Simply push and it will automatically pile the snow to the side you choose. Come back for your next pass, and with a flip of the blade, the snow is pilled to the same side, or snow can be piled to the opposite side by just walking the other direction. Need to change the direction of the pile in the same pass? Just turn the Sno-Blade 180 degrees and the snow is piled to the other side. The SnoBlade stores easily and takes up little room in your garage, just hang it on the wall. Dakota Sno-Blade is easy to use, the entire family can enjoy it. We are available to assist you 24 hours a day, 7 days a week, 365 days a year. You have our word that we will do everything we can for you. We always respond quickly and thank you again for your business. It may take a 7-10 days until your item leaves our international warehouse in route to your location.

admin dakota dakota, push, removal, shovel, snoblade, snow, wheels

Fit For the Following Models. This is a set of 2 track drive wheels for track series snow blowers. This is the rear drive wheel assembly on the track snow blowers and the hub size is 3/4. This all metal part is laser cut and welded. These Do NOT fit if you have a splined Axle Shaft. Specs 7 1/2 outside diameter 10 drive cogs 3/4 inch hub.

admin track 631-0002, blowers, cogs, drive, part, series, snow, track, wheels

The remaining portion of the shaft is between the two halves of the rim, giving this type rim superior strength and stability. AMOUNT OF SHAFT sticking out {each side of rim} NOTE:NHS This tire aN on H ighway S ervice Tire.

admin snow 15500-6, 15x500-6, blower, garden, snow, thrower, tiller, tire, wheels