Not sure if these parts are compatible or not. Maybe can fabricate some additional parts to make this work.
TWO John Deere TIRE RIM WHEEL assemblies 13×5.00-6 for some Garden Tiller Snow Blower Thrower with 3/4 ID shaft. Your assemblies will arrive aired up and ready to mount on your axle. Please read the add fully and see pictures top of page before you ask questions as we have detailed information in the description about this product. Does not fit all models! These are DIRECTIONAL (1)RIGHT / (1)LEFT Assemblies (SEE PICTURES). Part Numbers: 86151-L and 86151-R. BRAND: Kenda SIZE: 13×5.00-6 TREAD: A-478 Traction. DESCRIPTION: 2ply (load range “A”) Tube-Less R-1 Tiller / Snow blower Tire NHS. Height: 12.8 inches Width: 5.0 inches Rim Diameter: 6 inch. Weight Capacity: 295 lbs. NOTE: NHS This tire a N on H ighway S ervice Tire. BRAND: Monitor (MADE IN THE U S A) Rim Size: 6 x 4.375. Rim Diameter: 6 ” Rim Width: 4.375 “. One piece Welded Steel / Drive Axle /. Center Hole Opening: 3/4 (uses 3/4 inch shaft or axle) {see picture above}. Shaft Length: 5.25 over all SHAFT length measured through the center of the rim; shaft end to shaft end. Dowel hole size: 0.25 Shaft Offset: {see picture above}. AMOUNT OF SHAFT sticking out {each side of rim}. Outside of Rim: valve stem side – 1.25 inch {see picture above}. Inside of Rim: towards the frame of mower 3.50 inches {see picture above}. The remaining portion of the shaft is between the two halves of the rim, giving this type rim superior strength and stability. Original Equipment applications include: John Deere. Troy, Snapper, Arens, Murray. Toro, Bobcat, Brunton, MTD, Ditch Witch and many other brand Mowers, Tillers and Trenchers and Snow blowers. Carter Brothers, Roketa, Helix and other brand GO KARTS and many other LIVE AXLE TYPES EQUIPMENT used in various industrial applications. CUSTOM BUILDERS AND ALL DEALERS WELCOME.
13×5.00-6 13×500-6 13/5.00-6 TIRE RIM WHEELs Garden Tiller Snow Blower Thrower. Your assemblies will arrive aired up and ready to mount on your axle. Please read the add fully and see pictures top of page before you ask questions as we have detailed information in the description about this product. These are DIRECTIONAL (1)RIGHT / (1)LEFT Assemblies (SEE PICTURES). Part Numbers: 86151-L ; 86151-R. This Kenda tire rim assembly is designed for medium to heavy-duty usage and fits some but not all models of various brands including McCullagh, Worx, DR Trimmer, Ditch Witch, Brunton, and more. The 13×5.00-6 size and 2-ply construction make it suitable for self-propelled tillers, trimmers, brush mowers, and even go karts, snow blowers, and throwers. Items included in this (2)first quality new tire & rim assemblies mounted with 1/4 inch dowel hole and 3/4 inch ID axle rims, aired up and ready to mount. The equipment types it can be used with include ground drive, mowers, edger’s, carts, wagons, pulling, traction, ground driven equipment, snow throwers, snow removal, snow plows, rear tine tillers, garden tillers, garden equipment, chippers, shredders, and more. BRAND: Kenda SIZE: 13×5.00-6 TREAD: A-478 Traction. DESCRIPTION: 2ply (load range “A”) Tube-Less R-1 Tiller / Snow blower Tire NHS. Height: 12.8 inches Width: 5.0 inches Rim Diameter: 6 inch. Weight Capacity: 295 lbs. NOTE: NHS This tire a N on H ighway S ervice Tire. BRAND: Monitor (MADE IN THE U S A) Rim Size: 6 x 4.375. Rim Diameter: 6 ” Rim Width: 4.375 “. One piece Welded Steel / Drive Axle /. Center Hole Opening: 3/4 (uses 3/4 inch shaft or axle) {see picture above}. Shaft Length: 5.25 over all SHAFT length measured through the center of the rim; shaft end to shaft end. Dowel hole size: 0.25 Shaft Offset: {see picture above}. AMOUNT OF SHAFT sticking out {each side of rim}. Outside of Rim: valve stem side – 1.25 inch {see picture above}. Inside of Rim: towards the frame of mower 3.50 inches {see picture above}. The remaining portion of the shaft is between the two halves of the rim, giving this type rim superior strength and stability. Original Equipment applications include: Husqvarna, John Deere, Troy, Snapper, Arens, Murray. Toro, Bobcat, Brunton, MTD, Ditch Witch and many other brand Mowers, Tillers and Trenchers and Snow blowers. Carter Brothers, Roketa, Helix and other brand GO KARTS and many other LIVE AXLE TYPES EQUIPMENT used in various industrial applications. CUSTOM BUILDERS AND ALL DEALERS WELCOME.
Here is the answer! CARLISLE SNOW HOG solves the problem. Depending on the size you need these tires will fit all brands of Tillers, Snow Blowers, Go Karts, Fun Carts, Edger’s, Trimmers, Conventional Riding Mowers & Zero Turn mowers, pulling axles on all kinds of other equipment. This tire was originally designed for All Major brand tillers, snow blowers and DR Trimmers and mowers and has many custom applications. The X Tread holds firm for maximum Traction in Mud, Sand Gravel, Marsh’s, Swamps, Plowed fields, Dairy barns and Feed Lot applications. THE ROUNDED SHOULDER MAKES THIS A GREAT STEER TIRE FOR THE FRONT OF SAND RAILS, LAWN MOWERS AND GO KARTS! You can count on the quality of Carlisle. This CARLISLE Snow Hog tire is also perfect for a variety of outdoor power equipment, including power snow shovels, cultivators, snow blowers, and rear tine tillers. With a diameter of 17.2 inches, this tire is compatible with too many brands and models to list here, and can handle a capacity of 760 pounds per tire. Made of high-quality rubber material, this tire is durable and built to last. Whether you’re a homeowner or professional landscaper, this CARLISLE Snow Hog tire is an excellent choice for your outdoor power equipment needs. With its versatile compatibility and reliable performance, you can trust this tire to get the job done. CARLISLE 18×6.50-8 18×650-8 18/650 18/6.50-8 Snow Hog Thrower Blower Tiller TIRE. BRAND: CARLISLE SIZE: 18×6.50-8 TREAD: SNOW HOG. DESCRIPTION: 4ply (load range “B”) Tube-Less Traction LUG Tire NHS. Height: 17.3 inches Width: 6.6 inches Rim Diameter: 8 inch. Recommended Rim Widths: 5 to 6.35 inches wide. Maximum Weight Carrying Capacity: 770 lbs. NOTE: NHS This tire is a N on H ighway S ervice Tire. This tire is not intended for use in automotive Passenger Car or Light Truck applications. CUSTOM BUILDERS AND ALL DEALERS WELCOME.
This is used, but sure is nice and I took it in to be fixed because my snow blower did not start. The shop put new fuel lines on and a brand new carburetor and they said I needed a new pull rope, so I had that done too. (the bill was terrible) anyway I got it home and set it by the garage. And I would rather not talk about the rest when my husband backed the tractor up. This is super nice engine and it has a new carburetor and fuel lines and pull rope and it should go to someone who will have a use for it.
The remaining portion of the shaft is between the two halves of the rim, giving this type rim superior strength and stability. AMOUNT OF SHAFT sticking out {each side of rim} NOTE:NHS This tire aN on H ighway S ervice Tire.
8 LBS BOXED FITS QA36 QA42 SNOW THROWERS AND THE A1 A2 TILLERS GEAR BOX IS NICE, TIGHT AND READY TO INSTALL.
Not sure if these parts are compatible or not. Maybe can fabricate some additional parts to make this work.
GEAR BOX IS TIGHT KEY WAYS ARE FINE PART IS READY TO INSTALL LOOK AT PICTURES THIS IS BY FAR THE BEST GEAR BOX ON E-BAY! SOILD REPLACEMENT 7 LBS BOXED. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Snow Blowers”. The seller is “mrsfoxeybear” and is located in this country: US.
Recent Comments