Snow Blowers

MERIT AUTOMATION Innovation and Quality since 1982. Bolts right up to existing holes on JD 47″ and 54″ Blowers. Up for sale is a MERIT AUTOMATION Heavy Duty Actuator kit. This will work on any blower system. Put the snow anywhere you want it and never leave your tractor seat!! This kit features a HD rated cold weather actuator, with Swiss made internal switches, featuring a double 0 ring end cap, a MERIT Automation exclusive! This greatly increases the life the actuator when used in bad weather. Plus you get all the hardware needed to mount the actuator to your chute (all stainless). Also included is my easy mounting template that doesnt require any measurements to be taken on your chute. Simple wiring diagram is also included. 2 wires to battery and 2 wires to the actuator its that easy! The actuator toggle switch is included in the kit, which is also weather proof. The last picture simply shows what this system replaces. Plus you also get a nice weatherproof spring return momentary switch. Mounting is all stainless as well! You get Merit Automation quality at a economical price!! Hundreds of satisfied customers over the past 4 years! What my kit has over the others. Sealed HD Actuator IP67 with Protective Boot. Mounting Hardware ALL STAINLESS. 2 Quick disconnects Marine Grade. Fuse holder with spare fuse. Weather guard weather proof wire. Drill bit for actuator & switch mounting INCLUDED! Plus wire ties and mounts! 24/7 Tech Support and MORE! Over 2 years of R&D before bringing my kits to market. To see my chute control in action just search “72tx340″ or “Merit Automation” on youtube. Merit Automation Policies & Additional Information. Thousands of customers have chosen us for their automation needs. We are 100% committed to your complete satisfaction. Most questions are answered within 24 hours (weekends and holidays excluded). THANK YOU FOR CHOOSING MERIT AUTOMATION. The item “FOR John Deere 46 47 54 Snow Blower Thrower Chute Control Direct Bolt UP” is in sale since Saturday, March 16, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Snow Blowers”. The seller is “72tx340″ and is located in Caribou, Maine. This item can be shipped worldwide.

• MPN: Does Not Apply
• Brand: Merit

admin john blower, bolt, chute, control, deere, direct, john, snow, thrower

admin product 3526swe, blower, blowers, cadet, direct, equipment, power, product, review, snow, stage

admin marissa blower, blowers, direct, expert, marissa, snow

Manufactured by bcs this snowthrower attachment is for. Older bcs (models 715, 725, 735 and possilbly other newer bcs units with a splined pto adapter, or dog drive bcs units with a spline to dog drive adapter from bcs america check dimensions for mounting below), as well as older mainline tillers with bolt on attachment connections. (older mainline tillers circa 1972-1983 were manufactured for mainline by bcs). (see coupling description below and photo 2). These units, while new in the box, are part of the remaining inventory of.
Paul a sullivan who started mainline of north america the orginal bcs and mainline distributor in north america. The unit pictured was unboxed just for the photo so you can see the actual condition. These are the original heavy-duty production that helped bcs build its reputation. Just to put it in perspective these units were $499.00 in 1980. New units are $800-$850 and nowhere near the weight and construction. Very nice attachment, well described, works great!

Each auger also is designed with a breaking and gathering crossbar (picture 10) and a solid steel ice breaker block (picture to break up large chucks of ice. The auger is also protected with safety shear pins. The chute is adjustable from left to right and anything in between by means an operator lever on the chute.

Each chute also has a distance deflector to control the distance for accurate placement. (picture 4 black knobs on either side of chute). Ground clearance is controlled by adjustable skids (picture 9) to enable the attachment to clean down to the hard surface, or be given enough clearance so it can be used on gravel or stone walks or drives.

Coupling flange is 4-3/4 wide. Mating ring is 2-5/16 diameter. Mounting hole spacing is 3-3/4 center to center. Mounting hole diameter is 9/16. Exterior diameter of spline is 3/4. Interior diameter of spline is 9/16. All sizes are approximate as they may actually be metric. Height adjustment (by adjustable skids) 0″ – 1 1/4″. Because of the low price, but they are brand new.

These units have not been flooded or under water or any other such thing, but the appearance, not the functionality has been compromised. I just mention this because i received a report from a man who received a unit and was dissatisfied because he thought they had been flooded which is not the case. By the way he kept the unit and thinks the snowthrower works well!The item “SNOWTHROWER SNOWBLOWER FOR BCS TRACTOR TILLER DIRECT FIT FOR 715, 725, 735 MODEL” is in sale since Friday, January 10, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Snow Blowers”. The seller is “mainlinea” and is located in London, Ohio.

This item can only be shipped to United States.

• Power Source: Attachment
• Clearing Width: 24″
• Brand: BCS & Mainline
• Country of Manufacture: Italy
• Model: 600

admin snowthrower direct, model, snowblower, snowthrower, tiller, tractor

Brand new in box (new old stock). Manufactured by bcs this snowthrower attachment is for. Older bcs (models 715, 725, 735 and possilbly other newer bcs units with a splined pto adapter, or dog drive bcs units with a spline to dog drive adapter from bcs america check dimensions for mounting below), as well as older mainline tillers with bolt on attachment connections. (older mainline tillers circa 1972-1983 were manufactured for mainline by bcs).

Paul a sullivan who started mainline of north america the orginal bcs and mainline distributor in north america. The unit pictured was unboxed just for the photo so you can see the actual condition. These are the original heavy-duty production that helped bcs build its reputation.

Just to put it in perspective these units were $499.00 in 1980. New units are $800-$850 and nowhere near the weight and construction. Very nice attachment, well described, works great! Item exactly as described & works exactly as stated.

They are solid steel, (very thick metal plate, the attachment weighs 110 pounds) with a. Single stage balanced solid auger to handle wet or dry snow. Each auger also is designed with a breaking and gathering crossbar (picture 10) and a solid steel ice breaker block (picture to break up large chucks of ice. The auger is also protected with safety shear pins. The chute is adjustable from left to right and anything in between by means an operator lever on the chute. Each chute also has a distance deflector to control the distance for accurate placement. (picture 4 black knobs on either side of chute). Ground clearance is controlled by adjustable skids (picture 9) to enable the attachment to clean down to the hard surface, or be given enough clearance so it can be used on gravel or stone walks or drives. An important feature of the design is the width to horsepower ratio. With an eight horsepower engine, you have one horsepower per three inches of width which allows you to maintain a sustained engine speed of 3000 rpm which is right at the maximum torque (power level of the engine). Obviously the ratio is even better with the 10hp engine. Coupling flange is 4-3/4 wide. Mating ring is 2-5/16 diameter. Mounting hole spacing is 3-3/4 center to center. Mounting hole diameter is 9/16. Exterior diameter of spline is 3/4. Interior diameter of spline is 9/16. All sizes are approximate as they may actually be metric. Height adjustment (by adjustable skids) 0″ – 1 1/4″. Because of the low price, but they are brand new. The unit pictured was unpacked from one of the boxes so you can see exactly what you will get. However while these units are new and unused, they have been stored in an unheated warehouse for a number of years and some of the units on the outside wall have received moisture from condensation or a leak. As such some of the units have paint flaking and rust patches. These units have not been flooded or under water or any other such thing, but the appearance, not the functionality has been compromised. I just mention this because i received a report from a man who received a unit and was dissatisfied because he thought they had been flooded which is not the case. By the way he kept the unit and thinks the snowthrower works well!The item “SNOWTHROWER SNOWBLOWER FOR BCS TRACTOR TILLER DIRECT FIT FOR 715, 725, 735 MODEL” is in sale since Tuesday, January 07, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Snow Blowers”. The seller is “mainlinea” and is located in Virginia Beach, Virginia. This item can only be shipped to United States.

• Power Source: Attachment
• Clearing Width: 24″
• Brand: BCS & Mainline
• Country of Manufacture: Italy
• Model: 600

admin snowthrower direct, model, snowblower, snowthrower, tiller, tractor

Brand new in box (new old stock). Manufactured by bcs this snowthrower attachment is for. Older bcs (models 715, 725, 735 and possilbly other newer bcs units with a splined pto adapter, or dog drive bcs units with a spline to dog drive adapter from bcs america check dimensions for mounting below), as well as older mainline tillers with bolt on attachment connections. (older mainline tillers circa 1972-1983 were manufactured for mainline by bcs). (see coupling description below and photo 2). These units, while new in the box, are part of the remaining inventory of. Paul a sullivan who started mainline of north america the orginal bcs and mainline distributor in north america. The unit pictured was unboxed just for the photo so you can see the actual condition. These are the original heavy-duty production that helped bcs build its reputation. Just to put it in perspective these units were $499.00 in 1980.

Parts diagrams and the advertisment in photo 12 are available upon request. They are solid steel, (very thick metal plate, the attachment weighs 110 pounds) with a.

Single stage balanced solid auger to handle wet or dry snow. Each auger also is designed with a breaking and gathering crossbar (picture 10) and a solid steel ice breaker block (picture to break up large chucks of ice. The auger is also protected with safety shear pins.

The chute is adjustable from left to right and anything in between by means an operator lever on the chute. Each chute also has a distance deflector to control the distance for accurate placement. (picture 4 black knobs on either side of chute). Ground clearance is controlled by adjustable skids (picture 9) to enable the attachment to clean down to the hard surface, or be given enough clearance so it can be used on gravel or stone walks or drives. An important feature of the design is the width to horsepower ratio. With an eight horsepower engine, you have one horsepower per three inches of width which allows you to maintain a sustained engine speed of 3000 rpm which is right at the maximum torque (power level of the engine). Obviously the ratio is even better with the 10hp engine. Coupling flange is 4-3/4 wide. Mating ring is 2-5/16 diameter. Mounting hole spacing is 3-3/4 center to center. Mounting hole diameter is 9/16. Exterior diameter of spline is 3/4. Interior diameter of spline is 9/16.

All sizes are approximate as they may actually be metric. Height adjustment (by adjustable skids) 0″ – 1 1/4″.

However while these units are new and unused, they have been stored in an unheated warehouse for a number of years and some of the units on the outside wall have received moisture from condensation or a leak. As such some of the units have paint flaking and rust patches. These units have not been flooded or under water or any other such thing, but the appearance, not the functionality has been compromised. I just mention this because i received a report from a man who received a unit and was dissatisfied because he thought they had been flooded which is not the case. By the way he kept the unit and thinks the snowthrower works well!

This item can only be shipped to United States.

• Power Source: Attachment
• Clearing Width: 24″
• Brand: BCS & Mainline
• Country of Manufacture: Italy
• Model: 600

admin snowthrower direct, model, snowblower, snowthrower, tiller, tractor

Brand new in box (new old stock). Manufactured by bcs this snowthrower attachment is for. Older bcs (models 715, 725, 735 and possilbly other newer bcs units with a splined pto adapter, or dog drive bcs units with a spline to dog drive adapter from bcs america check dimensions for mounting below), as well as older mainline tillers with bolt on attachment connections. (older mainline tillers circa 1972-1983 were manufactured for mainline by bcs). (see coupling description below and photo 2). These units, while new in the box, are part of the remaining inventory of. Paul a sullivan who started mainline of north america the orginal bcs and mainline distributor in north america. The unit pictured was unboxed just for the photo so you can see the actual condition. These are the original heavy-duty production that helped bcs build its reputation. Just to put it in perspective these units were $499.00 in 1980. New units are $800-$850 and nowhere near the weight and construction.
Very nice attachment, well described, works great! Item exactly as described & works exactly as stated. The last photo is a copy of the original flyer for the snowthrower, log splitter, shredder, cart and furrowers from 1983. Parts diagrams and the advertisment in photo 12 are available upon request. They are solid steel, (very thick metal plate, the attachment weighs 110 pounds) with a. Single stage balanced solid auger to handle wet or dry snow.

Each auger also is designed with a breaking and gathering crossbar (picture 10) and a solid steel ice breaker block (picture to break up large chucks of ice. The auger is also protected with safety shear pins.

The chute is adjustable from left to right and anything in between by means an operator lever on the chute. Each chute also has a distance deflector to control the distance for accurate placement. (picture 4 black knobs on either side of chute). Ground clearance is controlled by adjustable skids (picture 9) to enable the attachment to clean down to the hard surface, or be given enough clearance so it can be used on gravel or stone walks or drives.

An important feature of the design is the width to horsepower ratio. With an eight horsepower engine, you have one horsepower per three inches of width which allows you to maintain a sustained engine speed of 3000 rpm which is right at the maximum torque (power level of the engine). Obviously the ratio is even better with the 10hp engine.

Exterior diameter of spline is 3/4. Interior diameter of spline is 9/16.

All sizes are approximate as they may actually be metric. Height adjustment (by adjustable skids) 0″ – 1 1/4″. Because of the low price, but they are brand new. The unit pictured was unpacked from one of the boxes so you can see exactly what you will get. However while these units are new and unused, they have been stored in an unheated warehouse for a number of years and some of the units on the outside wall have received moisture from condensation or a leak.
As such some of the units have paint flaking and rust patches. These units have not been flooded or under water or any other such thing, but the appearance, not the functionality has been compromised. I just mention this because i received a report from a man who received a unit and was dissatisfied because he thought they had been flooded which is not the case. By the way he kept the unit and thinks the snowthrower works well!The item “SNOWTHROWER SNOWBLOWER FOR BCS TRACTOR TILLER DIRECT FIT FOR 715, 725, 735 MODEL” is in sale since Saturday, January 04, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Snow Blowers”. The seller is “mainlinea” and is located in Virginia Beach, Virginia. This item can only be shipped to United States.

• Power Source: Attachment
• Clearing Width: 24″
• Brand: BCS & Mainline
• Country of Manufacture: Italy
• Model: 600

admin snowthrower direct, model, snowblower, snowthrower, tiller, tractor

Older bcs (models 715, 725, 735 and possilbly other newer bcs units with a splined pto adapter, or dog drive bcs units with a spline to dog drive adapter from bcs america check dimensions for mounting below), as well as older mainline tillers with bolt on attachment connections. (older mainline tillers circa 1972-1983 were manufactured for mainline by bcs). (see coupling description below and photo 2).

These units, while new in the box, are part of the remaining inventory of. Paul a sullivan who started mainline of north america the orginal bcs and mainline distributor in north america. The unit pictured was unboxed just for the photo so you can see the actual condition.

These are the original heavy-duty production that helped bcs build its reputation. Just to put it in perspective these units were $499.00 in 1980. New units are $800-$850 and nowhere near the weight and construction. Very nice attachment, well described, works great!

Item exactly as described & works exactly as stated. The last photo is a copy of the original flyer for the snowthrower, log splitter, shredder, cart and furrowers from 1983. Parts diagrams and the advertisment in photo 12 are available upon request. They are solid steel, (very thick metal plate, the attachment weighs 110 pounds) with a.

Single stage balanced solid auger to handle wet or dry snow. Each auger also is designed with a breaking and gathering crossbar (picture 10) and a solid steel ice breaker block (picture to break up large chucks of ice. The auger is also protected with safety shear pins. The chute is adjustable from left to right and anything in between by means an operator lever on the chute. Each chute also has a distance deflector to control the distance for accurate placement.

(picture 4 black knobs on either side of chute). Ground clearance is controlled by adjustable skids (picture 9) to enable the attachment to clean down to the hard surface, or be given enough clearance so it can be used on gravel or stone walks or drives. An important feature of the design is the width to horsepower ratio.

With an eight horsepower engine, you have one horsepower per three inches of width which allows you to maintain a sustained engine speed of 3000 rpm which is right at the maximum torque (power level of the engine). Obviously the ratio is even better with the 10hp engine. Coupling flange is 4-3/4 wide. Mating ring is 2-5/16 diameter. Mounting hole spacing is 3-3/4 center to center. Mounting hole diameter is 9/16. Exterior diameter of spline is 3/4. Interior diameter of spline is 9/16. All sizes are approximate as they may actually be metric. Height adjustment (by adjustable skids) 0″ – 1 1/4″. Because of the low price, but they are brand new. The unit pictured was unpacked from one of the boxes so you can see exactly what you will get. However while these units are new and unused, they have been stored in an unheated warehouse for a number of years and some of the units on the outside wall have received moisture from condensation or a leak. As such some of the units have paint flaking and rust patches. These units have not been flooded or under water or any other such thing, but the appearance, not the functionality has been compromised. I just mention this because i received a report from a man who received a unit and was dissatisfied because he thought they had been flooded which is not the case. By the way he kept the unit and thinks the snowthrower works well!
The item “SNOWTHROWER SNOWBLOWER FOR BCS TRACTOR TILLER DIRECT FIT FOR 715, 725, 735 MODEL” is in sale since Wednesday, January 01, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Snow Blowers”.
The seller is “mainlinea” and is located in Virginia Beach, Virginia. This item can only be shipped to United States.

• Power Source: Attachment
• Clearing Width: 24″
• Brand: BCS & Mainline
• Country of Manufacture: Italy
• Model: 600

admin snowthrower direct, model, snowblower, snowthrower, tiller, tractor

Brand new in box (new old stock). Manufactured by bcs this snowthrower attachment is for. Older bcs (models 715, 725, 735 and possilbly other newer bcs units with a splined pto adapter, or dog drive bcs units with a spline to dog drive adapter from bcs america check dimensions for mounting below), as well as older mainline tillers with bolt on attachment connections.

(older mainline tillers circa 1972-1983 were manufactured for mainline by bcs). (see coupling description below and photo 2). These units, while new in the box, are part of the remaining inventory of. Paul a sullivan who started mainline of north america the orginal bcs and mainline distributor in north america. The unit pictured was unboxed just for the photo so you can see the actual condition. These are the original heavy-duty production that helped bcs build its reputation. Just to put it in perspective these units were $499.00 in 1980. New units are $800-$850 and nowhere near the weight and construction. Very nice attachment, well described, works great! Item exactly as described & works exactly as stated. The last photo is a copy of the original flyer for the snowthrower, log splitter, shredder, cart and furrowers from 1983. Parts diagrams and the advertisment in photo 12 are available upon request.

They are solid steel, (very thick metal plate, the attachment weighs 110 pounds) with a. Single stage balanced solid auger to handle wet or dry snow. Each auger also is designed with a breaking and gathering crossbar (picture 10) and a solid steel ice breaker block (picture to break up large chucks of ice. The auger is also protected with safety shear pins.

The chute is adjustable from left to right and anything in between by means an operator lever on the chute. Each chute also has a distance deflector to control the distance for accurate placement. (picture 4 black knobs on either side of chute). Ground clearance is controlled by adjustable skids (picture 9) to enable the attachment to clean down to the hard surface, or be given enough clearance so it can be used on gravel or stone walks or drives. An important feature of the design is the width to horsepower ratio.

With an eight horsepower engine, you have one horsepower per three inches of width which allows you to maintain a sustained engine speed of 3000 rpm which is right at the maximum torque (power level of the engine). Obviously the ratio is even better with the 10hp engine. Coupling flange is 4-3/4 wide. Mating ring is 2-5/16 diameter. Mounting hole spacing is 3-3/4 center to center. Mounting hole diameter is 9/16. Exterior diameter of spline is 3/4. Interior diameter of spline is 9/16. All sizes are approximate as they may actually be metric.

The unit pictured was unpacked from one of the boxes so you can see exactly what you will get. However while these units are new and unused, they have been stored in an unheated warehouse for a number of years and some of the units on the outside wall have received moisture from condensation or a leak. As such some of the units have paint flaking and rust patches. These units have not been flooded or under water or any other such thing, but the appearance, not the functionality has been compromised. I just mention this because i received a report from a man who received a unit and was dissatisfied because he thought they had been flooded which is not the case. By the way he kept the unit and thinks the snowthrower works well!

The item “SNOWTHROWER SNOWBLOWER FOR BCS TRACTOR TILLER DIRECT FIT FOR 715, 725, 735 MODEL” is in sale since Thursday, December 26, 2013. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Snow Blowers”. The seller is “mainlinea” and is located in Virginia Beach, Virginia. This item can only be shipped to United States.

• Power Source: Attachment
• Clearing Width: 24″
• Brand: BCS & Mainline
• Country of Manufacture: Italy
• Model: 600

admin snowthrower direct, model, snowblower, snowthrower, tiller, tractor

Brand new in box (new old stock). Manufactured by bcs this snowthrower attachment is for. Older bcs (models 715, 725, 735 and possilbly other newer bcs units with a splined pto adapter, or dog drive bcs units with a spline to dog drive adapter from bcs america check dimensions for mounting below), as well as older mainline tillers with bolt on attachment connections. (older mainline tillers circa 1972-1983 were manufactured for mainline by bcs). (see coupling description below and photo 2). These units, while new in the box, are part of the remaining inventory of. Paul a sullivan who started mainline of north america the orginal bcs and mainline distributor in north america. The unit pictured was unboxed just for the photo so you can see the actual condition.

Item exactly as described & works exactly as stated. The last photo is a copy of the original flyer for the snowthrower, log splitter, shredder, cart and furrowers from 1983.
Parts diagrams and the advertisment in photo 12 are available upon request. They are solid steel, (very thick metal plate, the attachment weighs 110 pounds) with a. Single stage balanced solid auger to handle wet or dry snow. Each auger also is designed with a breaking and gathering crossbar (picture 10) and a solid steel ice breaker block (picture to break up large chucks of ice. The auger is also protected with safety shear pins.

The chute is adjustable from left to right and anything in between by means an operator lever on the chute. Each chute also has a distance deflector to control the distance for accurate placement. (picture 4 black knobs on either side of chute). Ground clearance is controlled by adjustable skids (picture 9) to enable the attachment to clean down to the hard surface, or be given enough clearance so it can be used on gravel or stone walks or drives.

An important feature of the design is the width to horsepower ratio. With an eight horsepower engine, you have one horsepower per three inches of width which allows you to maintain a sustained engine speed of 3000 rpm which is right at the maximum torque (power level of the engine). Obviously the ratio is even better with the 10hp engine. Coupling flange is 4-3/4 wide. Mating ring is 2-5/16 diameter. Mounting hole spacing is 3-3/4 center to center. Mounting hole diameter is 9/16. Exterior diameter of spline is 3/4. Interior diameter of spline is 9/16. All sizes are approximate as they may actually be metric. Height adjustment (by adjustable skids) 0″ – 1 1/4″. Because of the low price, but they are brand new.

The unit pictured was unpacked from one of the boxes so you can see exactly what you will get. However while these units are new and unused, they have been stored in an unheated warehouse for a number of years and some of the units on the outside wall have received moisture from condensation or a leak. As such some of the units have paint flaking and rust patches.

The item “SNOWTHROWER SNOWBLOWER FOR BCS TRACTOR TILLER DIRECT FIT FOR 715, 725, 735 MODEL” is in sale since Monday, December 16, 2013. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Snow Blowers”. The seller is “mainlinea” and is located in Virginia Beach, Virginia. This item can only be shipped to United States.

• Power Source: Attachment
• Clearing Width: 24″
• Brand: BCS & Mainline
• Country of Manufacture: Italy
• Model: 600

admin snowthrower direct, model, snowblower, snowthrower, tiller, tractor