Snow Blowers

Brand new in box (new old stock). Manufactured by bcs this snowthrower attachment is for. Older bcs (models 715, 725, 735 and possilbly other newer bcs units with a splined pto adapter, or dog drive bcs units with a spline to dog drive adapter from bcs america check dimensions for mounting below), as well as older mainline tillers with bolt on attachment connections. (older mainline tillers circa 1972-1983 were manufactured for mainline by bcs). (see coupling description below and photo 2). These units, while new in the box, are part of the remaining inventory of. Paul a sullivan who started mainline of north america the orginal bcs and mainline distributor in north america. The unit pictured was unboxed just for the photo so you can see the actual condition. These are the original heavy-duty production that helped bcs build its reputation. Just to put it in perspective these units were $499.00 in 1980.

Parts diagrams and the advertisment in photo 12 are available upon request. They are solid steel, (very thick metal plate, the attachment weighs 110 pounds) with a.

Single stage balanced solid auger to handle wet or dry snow. Each auger also is designed with a breaking and gathering crossbar (picture 10) and a solid steel ice breaker block (picture to break up large chucks of ice. The auger is also protected with safety shear pins.

The chute is adjustable from left to right and anything in between by means an operator lever on the chute. Each chute also has a distance deflector to control the distance for accurate placement. (picture 4 black knobs on either side of chute). Ground clearance is controlled by adjustable skids (picture 9) to enable the attachment to clean down to the hard surface, or be given enough clearance so it can be used on gravel or stone walks or drives. An important feature of the design is the width to horsepower ratio. With an eight horsepower engine, you have one horsepower per three inches of width which allows you to maintain a sustained engine speed of 3000 rpm which is right at the maximum torque (power level of the engine). Obviously the ratio is even better with the 10hp engine. Coupling flange is 4-3/4 wide. Mating ring is 2-5/16 diameter. Mounting hole spacing is 3-3/4 center to center. Mounting hole diameter is 9/16. Exterior diameter of spline is 3/4. Interior diameter of spline is 9/16.

All sizes are approximate as they may actually be metric. Height adjustment (by adjustable skids) 0″ – 1 1/4″.

However while these units are new and unused, they have been stored in an unheated warehouse for a number of years and some of the units on the outside wall have received moisture from condensation or a leak. As such some of the units have paint flaking and rust patches. These units have not been flooded or under water or any other such thing, but the appearance, not the functionality has been compromised. I just mention this because i received a report from a man who received a unit and was dissatisfied because he thought they had been flooded which is not the case. By the way he kept the unit and thinks the snowthrower works well!

This item can only be shipped to United States.

• Power Source: Attachment
• Clearing Width: 24″
• Brand: BCS & Mainline
• Country of Manufacture: Italy
• Model: 600

Be Sociable, Share!

• 

admin snowthrower direct, model, snowblower, snowthrower, tiller, tractor