John Deere 44 SnowBlower snowthrower snow thrower blower 44 auger chute skid
Two-stage auger and blower. The low-speed auger picks up snow and moves it toward the center of the machine into the high-speed rotor where it is blown out of the discharge chute. A cast-iron gearbox provides speed reduction for the auger and is protected by shear bolts for each auger half. Two-stage snow blowers are more effective than single-stage snow throwers when operating in deep snow as the low-speed auger is used to size crusted material. They also provide consistent snow placement in variable snow conditions because the high-speed rotor gives the discharged snow consistent velocity-even in very light clean-up volumes. The snow blower slips over and locks onto the front hitch with attached snap pins. Fast and easy installation is accomplished with no tools or loose parts. Hitch is provided with the snow blower. Optional bumper or brush guard can remain on the tractor with snow blower installed. For uneven work conditions. Skid shoes help control the height of the snow blower cutting edge and are especially helpful for use on gravel drives and irregular surfaces. Skid shoes can be adjusted by loosening the mounting bolts and positioning them for the operating conditions. Securely held in place by three bolts. Can be adjusted for rough or smooth surface conditions. Snow Blower for X300 Series Tractors. 112 cm 44 in. Height to top of housing. 45.7 cm 18 in. 12.1 cm x 35.6 cm 4.75 in. Ultra high molecular weight (UHMW) polyethylene. 15.2 cm 6 in. 100 degrees to each side. 30.5 cm 12 in. Sealed bearings on each end. Shear bolt for each auger half. Optional for both sides of housing. Spring-assisted foot lift or hydraulic lift (X310). 102 mm 4 in. 81.6 kg (180 lb). No tools required; 5 minutes. The discharge spout and deflector are made from high-density polyethylene material that will not dent or rust and resists snow buildup to ensure trouble-free operation. It is more durable, especially in cold-weather use, than the polypropylene material used by some other manufacturers. Spout direction and deflector angle can both be conveniently controlled from the operator station. The chute material remains smooth and is less likely to clog than a steel chute. Controls to operate the chute are conveniently located for easy operation. The discharge spout can be rotated 200 degrees from the operator station. The deflector can be easily adjusted from the operator’s station to determine distance of throw. For reliability and long life. Heavy-duty in-line belt and gearbox drive. Dependable in-line belt drive (belt colored red). Drive system features include. In-line drive belt ensures efficient transfer of power and dependable operation. Spring-loaded idler pulley keeps belt at the optimum tension. Durable cast-iron, right-angle gearbox drives the blower and also provides power to the auger. The item “John Deere 44 SnowBlower snowthrower snow thrower blower 44 auger chute skid” is in sale since Saturday, July 18, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Snow Blowers”. The seller is “mmtsupply” and is located in Chardon, Ohio. This item can’t be shipped, the buyer must pick up the item.
- Type: Two Stage
- Brand: John Deere
- Model: 44