Archive

Posts Tagged ‘carrier’

Cargo Carrier withRamp 28 x 60 USA For Loading Snowblowers and Wheelchairs

May 4th, 2019
Comments Off
Cargo Carrier withRamp 28 x 60 USA For Loading Snowblowers and Wheelchairs


Cargo Carrier withRamp 28 x 60 USA For Loading Snowblowers and Wheelchairs


Cargo Carrier withRamp 28 x 60 USA For Loading Snowblowers and Wheelchairs


Cargo Carrier withRamp 28 x 60 USA For Loading Snowblowers and Wheelchairs


Cargo Carrier withRamp 28 x 60 USA For Loading Snowblowers and Wheelchairs


Cargo Carrier withRamp 28 x 60 USA For Loading Snowblowers and Wheelchairs


Aluminum Cargo Carrier with Ramp. Model # 528 ACCTG. This listing is for the carrier only. This high quality, economical carrier is ideal for transporting heavy equipment. You now have the ability to easily transport equipment or electric wheelchairs/scooters with a Sport Utility Vehicle, or any other vehicle that has a class 3 or class 4 trailer hitch. When loading onto this. Low to the ground carrier. As opposed to loading equipment into a high pick-up truck bed, or trying to wrestle the equipment into the back of a SUV (if there is room). With the built-in ramp the operation is fairly simple. The ramp is bolted on and lays in the carrier when not in use. When needed lift the. And deploy it to the ground as it pivots on two bolts. After loading the equipment raise the ramp to an upright position and then hold it in place with a provided hitch pin and already installed bracket. This carrier also gives you the option to change the side the ramp opens on. The tube that goes into the receiver bolts onto the carrier so if you switch sides (the receiver tube sticks out the opposite end) the gate will then deploy on the drivers side. Another advantage to the bolt on receiver tube is if you bent the tube from an accident you can easily replace it. Lightweight all aluminum construction. The 60″ long x 28″ wide carrier has a 2″ x 3″ x 3/16 thick angle frame. 2″ square tube (used for attaching to the vehicle) sticks out 8″ from the frame and is received by a class 3 or class 4 trailer hitch. The carrier’s expanded metal floor is reinforced with six – 1″ x 1″ square tubing. The ramp is surfaced with anti-slip expanded metal and reinforced with six 1″ wide x 1-1/2″ deep tubing. A wear plate is welded to the bottom of the ramp providing additional reinforcement. Total weight is only 56 lbs. Weight capacity (very conservative). This durable aluminum cargo carrier will not rust or ever need painting. Please note: anything that goes into a receiver hitch will have a little play. What you can do to eliminate the play (not really necessary though) is to tie down the equipment to the bumper on the inside (side closest to vehicle), and directly to the outside of the carrier at the opposite side (side furthest from the vehicle). The item “Cargo Carrier withRamp 28 x 60 USA For Loading Snowblowers and Wheelchairs” is in sale since Wednesday, September 21, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Snow Blowers”. The seller is “mackieenterprises” and is located in Clementon, New Jersey. This item can be shipped to United States.

  • Type: N/A
  • Power Source: N/A
  • Clearing Width: N/A
  • Brand: Five Star Mfg
  • Model: 528 ACC-TG
  • MPN: 528 ACC-TG
  • Country of Manufacture: United States
  • Country/Region of Manufacture: United States

cargo , , , , ,

Cargo Carrier withRamp 32 x 48 USA For Loading Snowblowers and Wheelchairs

October 24th, 2017
Comments Off
Cargo Carrier withRamp 32 x 48 USA For Loading Snowblowers and Wheelchairs


Cargo Carrier withRamp 32 x 48 USA For Loading Snowblowers and Wheelchairs


Cargo Carrier withRamp 32 x 48 USA For Loading Snowblowers and Wheelchairs


Cargo Carrier withRamp 32 x 48 USA For Loading Snowblowers and Wheelchairs


Aluminum Cargo Carrier with Ramp. Model # 432 ACCTG. This listing is for the carrier only. The cost DOES NOT include the snow blower. This high quality, economical carrier is ideal for transporting heavy equipment. You now have the ability to easily transport equipment or electric wheelchairs/scooters with a Sport Utility Vehicle, or any other vehicle that has a class 3 or class 4 trailer hitch. What an extremely safe operation when loading onto this low to the ground carrier , as opposed to loading equipment into a high pick-up truck bed, or trying to wrestle the equipment into the back of a SUV (if there is room). With the built-in ramp the operation is fairly simple. The ramp is bolted on and lays in the carrier when not in use. When needed lift the lightweight ramp and deploy it to the ground as it pivots on two bolts. After loading the equipment raise the ramp to an upright position and then hold it in place with a provided hitch pin and already installed bracket. Lightweight all aluminum construction. The 48″ long x 32″ wide carrier has a 2″ x 3″ x 3/16 thick angle frame. 2″ square tube (used for attaching to the vehicle) sticks out 8″ from the frame and is received by a class 3 or class 4 trailer hitch. The carrier’s expanded metal floor is reinforced with four – 1″ x 1″ square tubing. The ramp is surfaced with anti-slip expanded metal and reinforced with seven 1″ wide x 1-1/2″ deep tubing. A wear plate is welded to the bottom of the ramp providing additional reinforcement. Total weight is only 52 lbs. Weight capacity (very conservative). Carrier w/ ramp folded in place. New & Improved Ramp Hinge (shown with optional D Ring). Loading is a cinch. This durable aluminum cargo carrier will not rust or ever need painting. Please note: anything that goes into a receiver hitch will have a little play. What you can do to eliminate the play (not really necessary though) is to tie down the equipment to the bumper on the inside (side closest to vehicle), and directly to the outside of the carrier at the opposite side (side furthest from the vehicle). The item “Cargo Carrier withRamp 32 x 48 USA For Loading Snowblowers and Wheelchairs” is in sale since Wednesday, September 21, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Snow Blowers”. The seller is “mackieenterprises” and is located in Clementon, New Jersey. This item can be shipped to United States.

  • Type: N/A
  • Power Source: N/A
  • Clearing Width: N/A
  • Brand: Five Star Mfg,
  • Model: 432 ACCTG
  • MPN: 432-ACCTG
  • Country of Manufacture: United States
  • Country/Region of Manufacture: United States

cargo , , , , ,

Hymog With Snow Blower Remote Controlled Carrier Vehicle

July 14th, 2017
Comments Off

Cargo Carrier withRamp 36 x 48 USA For Loading Snowblowers and Wheelchairs

July 5th, 2017
Comments Off
Cargo Carrier withRamp 36 x 48 USA For Loading Snowblowers and Wheelchairs


Cargo Carrier withRamp 36 x 48 USA For Loading Snowblowers and Wheelchairs


Cargo Carrier withRamp 36 x 48 USA For Loading Snowblowers and Wheelchairs


Cargo Carrier withRamp 36 x 48 USA For Loading Snowblowers and Wheelchairs


Cargo Carrier withRamp 36 x 48 USA For Loading Snowblowers and Wheelchairs


Aluminum Cargo Carrier with Ramp. Model # 436 ACCTG. This listing is for the carrier only. The cost DOES NOT include the snow blower. This high quality, economical carrier is ideal for transporting heavy equipment. You now have the ability to easily transport equipment or electric wheelchairs/scooters with a Sport Utility Vehicle, or any other vehicle that has a class 3 or class 4 trailer hitch. What an extremely safe operation when loading onto this low to the ground carrier , as opposed to loading equipment into a high pick-up truck bed, or trying to wrestle the equipment into the back of a SUV (if there is room). With the built-in ramp the operation is fairly simple. The ramp is bolted on and lays in the carrier when not in use. When needed lift the lightweight ramp and deploy it to the ground as it pivots on two bolts. After loading the equipment raise the ramp to an upright position and then hold it in place with a provided hitch pin and already installed bracket. Lightweight all aluminum construction. The 48″ long x 36″ wide carrier has a 2″ x 3″ x 3/16 thick angle frame. 2″ square tube (used for attaching to the vehicle) sticks out 8″ from the frame and is received by a class 3 or class 4 trailer hitch. The carrier’s expanded metal floor is reinforced with four – 1″ x 1″ square tubing. The ramp is surfaced with anti-slip expanded metal and reinforced with seven 1″ wide x 1-1/2″ deep tubing. A wear plate is welded to the bottom of the ramp providing additional reinforcement. Total weight is only 58 lbs. Weight capacity (very conservative). Carrier w/ ramp folded in place. New & Improved Ramp Hinge (shown with optional D Ring). Loading is a cinch. This durable aluminum cargo carrier will not rust or ever need painting. Please note: anything that goes into a receiver hitch will have a little play. What you can do to eliminate the play (not really necessary though) is to tie down the equipment to the bumper on the inside (side closest to vehicle), and directly to the outside of the carrier at the opposite side (side furthest from the vehicle). The item “Cargo Carrier withRamp 36 x 48 USA For Loading Snowblowers and Wheelchairs” is in sale since Friday, November 18, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Snow Blowers”. The seller is “mackieenterprises” and is located in Clementon, New Jersey. This item can be shipped to United States.

  • Type: N/A
  • Power Source: N/A
  • Clearing Width: N/A
  • Brand: Five Star Mfg,
  • Model: 436-ACCTG
  • MPN: 436-ACCTG
  • Country of Manufacture: United States
  • Country/Region of Manufacture: United States

cargo , , , , ,

Cargo Carrier withRamp 36 x 48 USA For Loading Snow Blowers and Wheelchairs

May 6th, 2015
Comments Off
Cargo Carrier withRamp 36 x 48 USA For Loading Snow Blowers and Wheelchairs



Is not available for this listing. Any item longer than 66 inches (167cm) or weighing more than 66 lbs. (29kg) is not eligible. Aluminum cargo carrier with ramp. Model # 436 acctg. This listing is for the carrier only. Include the snow blower. This high quality, economical carrier is ideal for transporting heavy equipment. You now have the ability to easily transport equipment or electric wheelchairs/scooters with a sport utility vehicle, or any other vehicle that has a class 3 or class 4 trailer hitch. When loading onto this. Low to the ground carrier. As opposed to loading equipment into a high pick-up truck bed, or trying to wrestle the equipment into the back of a suv (if there is room). With the built-in ramp the operation is fairly simple. The ramp is bolted on and lays in the carrier when not in use. When needed lift the. And deploy it to the ground as it pivots on two bolts. After loading the equipment raise the ramp to an upright position and then hold it in place with a provided hitch pin and already installed bracket. The 48″ long x 36″ wide carrier has a 2″ x 3″ x 3/16 thick angle frame. 2″ square tube (used for attaching to the vehicle) sticks out 8″ from the frame and is received by a class 3 or class 4 trailer hitch. The carrier’s expanded metal floor is reinforced with four – 1″ x 1″ square tubing. The ramp is surfaced with. Expanded metal and reinforced with seven 1″ wide x 1-1/2″ deep tubing. Is welded to the bottom of the ramp providing additional reinforcement. Total weight is only. Weight capacity (very conservative). Carrier w/ ramp folded in place. New & improved ramp hinge. (shown with optional d ring). Loading is a cinch. This durable aluminum cargo carrier will not rust or ever need painting. Anything that goes into a receiver hitch will have a little play. What you can do to eliminate the play (not really necessary though) is to tie down the equipment to the bumper on the inside (side closest to vehicle), and directly to the outside of the carrier at the opposite side (side furthest from the vehicle). This cargo carrier comes fully assembled. Some far out of the way territories there can be additional charges. With any questions or comments. Telephone customer service hours. On all other items we charge the. Our goal is to offer our customer the most. And the expected transit time. This option is available during the checkout process. We can frequently combine the orders into one package. If an item has. This is why it is difficult to include an automatic. For many of our listings. If this is an. Please insert the quantity and just click. The order will be forwarded to us. Otherwise, we will process the order by calculating the. 7am est – 6pm est. We will normally respond within an hour of placing your order. You should receive your invoice by 7am est the next morning. All multiple quantity orders will be forwarded to us. We will combine the orders into one invoice, calculate the. Increase sales by 18% and double your hits – vendio gallery.The item “Cargo Carrier withRamp 36 x 48 USA For Loading Snow Blowers and Wheelchairs” is in sale since Sunday, March 16, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Snow Blowers”. The seller is “mackieenterprises” and is located in Clementon, New Jersey. This item can be shipped to United States and to Canada.

  • Type: N/A
  • Power Source: N/A
  • Clearing Width: N/A
  • Brand: Five Star Mfg.
  • Model: 436-ACCTG
  • MPN: 436-ACCTG
  • Country of Manufacture: United States

cargo , , , , , ,